Post actualizado el día octubre 27, 2026 by DeiviSanzPlay
So you’re on a call, someone else tries to reach you, and your phone stays dead silent. No beep, no vibration, nothing. You hang up thinking everyone forgot about you, but nope — it’s just that call waiting on Digi isn’t switched on. That’s the whole mystery.
I went through this exact headache a while back. I called my operator, I restarted the phone, I even thought my SIM was dying. Turns out the fix takes literally five seconds and you don’t need to talk to anyone. Let me save you the drama.
What call waiting actually does (and why Digi hides it)
Call waiting is a network feature, not a phone feature. That’s the part most people miss. Your phone is just the messenger. If Digi’s side doesn’t have the call waiting service enabled on your line, no setting in your device will make a second caller ring through.
By default, many Digi lines come with it deactivated. Not because they’re being sneaky — it’s just how the standard provisioning works. You have to ask for it, and the fastest way is a USSD code from your dialer.
Option 1: The *43# trick (the one that actually works)
Open your phone app, the same place you type numbers to call someone. Then dial:
*43# and hit call.
You’ll see a quick message on screen confirming the call waiting activation. That’s it. Done. If someone calls while you’re already talking, you’ll get the classic beep and can switch between the two calls.
Want to turn it off? Same routine but with a different code:
#43# and hit call.
And if you ever want to check whether it’s active without changing anything, dial *#43#. The screen will tell you if the service is enabled or not. Handy when you switch phones and you’re not sure what carried over.
Option 2: Dig into your phone’s settings menu
This route depends a lot on the brand and the Android version, but the general path is similar on most devices.
On Android
- Open the Phone app.
- Tap the three dots or the gear icon to enter Settings.
- Go to Call settings or Calling accounts.
- Look for Additional services or Supplementary services.
- Tap Call waiting and switch it on.
On some Samsung, Xiaomi or Pixel phones the menu names change slightly, but you’ll always find it buried under call settings. If you don’t see it, your carrier may have hidden the toggle — which brings us back to the USSD code.
On iPhone
- Go to Settings.
- Tap Phone.
- Tap Call Waiting.
- Flip the switch on.
Same rule applies: if Digi hasn’t provisioned the service on its network, the iOS toggle does nothing. So even if you’re an iPhone person, the *43# trick is still your safest bet.
Common reasons call waiting on Digi doesn’t ring
You activated it, someone calls, still nothing. Before you throw the phone out the window, check these:
- Voicemail intercepting the call. If you have voicemail active and don’t answer the second call fast enough, it gets routed there instead of ringing on your line. That’s not a bug, it’s configuration.
- Airplane mode or weak signal. Call waiting needs a stable connection to the network. If you’re in a dead zone, the second call simply won’t reach you.
- Wi-Fi Calling conflicts. If you’re using Wi-Fi calling on Digi, some devices handle waiting calls differently. Try testing with Wi-Fi calling off to isolate the problem.
- Old SIM card. Rare, but a very old SIM can fail to register supplementary services. Asking Digi for a free SIM swap usually fixes it.
Does call waiting cost extra on Digi?
No. Call waiting on Digi is free. There’s no monthly fee, no per-use charge. The only thing that costs money is the call itself, and that’s billed exactly as it would be if you weren’t using the feature.
When you have two calls going at once, you can put one on hold and swap between them, or hang up one and keep the other. The hold option is handy for work calls where you need to check something with a colleague mid-conversation.
What about call forwarding and conference calls?
These are separate services, and the codes are different. Call forwarding uses **21*number# to activate, #21# to deactivate and *#21# to check status. Conference calling is usually triggered during a call by pressing the option to add another participant.
Don’t confuse them with call waiting. They all live in the same «supplementary services» bucket, but they do different jobs. If you mix up the codes, you might end up forwarding all your calls to nowhere and wondering why your phone went quiet for a week. Ask me how I know.
When to contact Digi support directly
If you’ve tried *43#, rebooted the phone, checked the settings menu, and the second call still doesn’t ring, then it’s time to open a ticket. Digi’s customer service can check on their end whether the service is blocked, whether your SIM has a provisioning error, or whether there’s a known issue in your area.
Before you call, have your line number and ID ready. Also worth testing with another person calling you while you’re on a call with someone else. That way you can describe the exact scenario and skip the «have you tried turning it off and on» phase.
Honestly, 90% of cases get solved with the USSD code. The other 10% are usually SIM or provisioning issues that only the operator can touch. Either way, you now know more about call waiting on Digi than most people who’ve had the line for years.